12 May, 2020 / BY Neil Sharp

7 points to include in your RFQ to a contract electronics manufacturer

This post was originally written in 2015 but has since been updated and republished for maximum accuracy.

After weeks of carrying out research and refining a "shortlist" of potential electronics manufacturing services (EMS) providers, it’s time to start work on the request for quotation (RFQ) document. The structure and format of the document is likely to vary depending on the size of company, the complexity of the product range and how much of its manufacturing operation will be outsourced.

It's tempting to send out a generic RFQ document to each contract electronics manufacturer, in order to get some quick pricing back, but this approach could cause issues further down the line.

For example, if key pieces of data are missing from the quote pack or sections of the document are open to interpretation the process could stall. Worse still, assumptions could be made (by both parties), which only come to light once a final decision has been made - by which time it will be too late.

To improve the quality of the responses you receive back from the EMS companies and help you work through the process efficiently, here are seven points to consider for your next RFQ document.

1. Statement of objectives

Summarise what you expect from your outsourcing project, what it means to your company and what your ambitions are for the partnership in the short, mid and long term. This will help potential suppliers create a relevant proposal that is based on your company's own vision, while allowing them to demonstrate how they differentiate themselves from the competition in order to add value to your business.

2. Company background

What is your vision and how are you setting out to achieve this? Which market sectors are you focussed on today; are there others you are considering for the future? What does your product portfolio look like; do you have a range of very similar products utilising common components or do they vary greatly in terms of complexity? What is your market share and geographical reach?

It’s important to try and keep this information concise and to the point to avoid the EMS provider drowning in detail. They will, however, find this information useful when trying to gauge if they will be a good fit for your company.

3. Key contacts

Include the details of the person in charge of heading up the project. Assigning a single point of contact is a great way to control the RFQ process - however, if there are technical queries that need addressing by another department, or the contact is away from the business, bottlenecks can occur.

Likewise, while having direct access to other members of the team can be advantageous to the EMS provider, you will need to clarify roles and responsibilities and ensure the flow of all communication is managed.

4. Capability requirements

The RFQ should contain detailed information about your company requirements - for instance, particular areas of expertise, qualifications and certifications etc. If your current manufacturing process utilises a specific piece of production equipment or process - for example, selective soldering or conformal coating - then you should make the EMS provider aware upfront.

Vendor questionnaires can be used to obtain the data and also serve well when it comes to quick comparisons between suppliers. However, as with the RFQ, make sure any questionnaire you send is tailored to the service being offered and if certain accreditations or processes are "nice to haves" then it makes sense to clarify this early with the EMS company.

Click Here to Discover the Power of Outsourcing

5. Service expectations

How much of your operation are you planning to outsource and how involved do you want the chosen EMS partner to be, for instance, in areas such as design for manufacture? EMS suppliers are constantly adding new and innovative services to their remit as a way of adding value, such as comprehensive test services, configure-to-order (CTO) and direct ship fulfilment. Some of these additional services could well be of benefit so it is often worth exploring the potential impact of these for your organisation.

Perhaps you are considering sourcing some, or all, of your own materials and free-issuing to the assembly partner. A decision such as this could influence how the EMS provider approaches the material element of your quote and if there is ambiguity over supply chain responsibility, you may find you receive very different quotes from what you believe to be similar EMS providers.

6. Response format and timing

Setting out a framework for how you expect quotations to be sent back will allow for a quantitative comparison between multiple potential suppliers. In this section, clearly state when the deadline for submissions is and the format you require. This practical information will avoid unnecessary hold-ups due to misunderstandings. Not all of these will be relevant but some areas you may wish the EMS provider to include in the quote could be:

  • Unit price
  • Number of hours per product/assembly (split by resource type)
  • Hourly rate (split by resource rate)
  • Material cost
  • Material margin
  • Material handling fee (if applicable)
  • Standard lead-time (split out by material and labour)
  • Details of any non-recurring engineering costs
  • Component/material liabilities (material excess/minimum order quantities etc)

In order for the EMS provider to submit the very best quotation, they are likely to want to know the following from you:

  • Volumes (annual usage, order and call off quantities etc)
  • Target pricing (a ballpark figure is often fine)
  • Forecast demand (is there a stable run rate throughout the year or more of a seasonal demand?)
  • Forecast quantity projection (what do years two and three look like?)
  • Design registration/supported pricing (if you have already agreed some then it makes sense for the EMS provider to access this)
  • Build standards (IPC-A-610 class 2/3 or perhaps you have your own manufacturing standards?)
  • Confidentiality (are there any suppliers that you want the EMS providers to avoid making contact with at this stage?)

7. Terms and conditions

Include all of the terms and conditions that you would require to be incorporated into any future contract so that the prospective vendors can comprehend these when providing their responses relating to service levels, contract length, warrantees, renewal options, delivery penalties and payment terms etc.

A concise document that clearly sets out your requirements and expectations will attract accurate proposals from your EMS supplier shortlist and help to move you through to the next stage. While writing the perfect RFQ document may not seem like the most exciting part of the project, it forms the foundation of a well-managed project, which should ultimately allow you to make an informed choice so you can finally embark on your outsourcing venture. 

If you have found this content useful and would like to read more about electronics manufacturing click here to subscribe to our blog.

Executive Guide to Outsourcing Your Electronics Manufacturing

Written by Neil Sharp

Neil has over 25 years’ experience in Electronics Manufacturing Services and Component Distribution. During his career, Neil has held a range of leadership positions in sales, marketing, and customer service. Neil is currently part of the ESCATEC Senior Management Team and is responsible for setting and delivering the overall Group Marketing strategy. Neil heads up the marketing department and is responsible for both the strategy and the implementation of innovative marketing campaigns designed to deliver high quality content to those seeking outsourcing solutions.